Scale Aviation Modeller International — November 2017
Harbour, February 1942. Bu.No.1063, VJ-1, summer 1943. Bu.No.1063, VJ-1, 1943 - early 1945. Bu.No.1063, NACA Langley Memorial A ...
technology in producing complex shapes. There is in particular, some overlapping between the two PE sets I used, which necessita ...
aligned, there’s a noticeable misalignment of the nose panel and bow chine. The solution is to sand off the front of the chine s ...
The cockpit windscreen is quite clear and a reasonable fit, although the side sills of the cockpit need to be built up slightly ...
using Blu-Tack masking) at the wing pylon and rear fuselage. Rather than use the rather shiny decals, I masked and painted the w ...
TONKA Colourful Revell 1/72 Scale Tornado GR4 “Dambusters 70th Anniversary” by Garth Nicholson BACKGROUND Familiar to most aviat ...
COCKPIT The Aires resin cockpit is a definite improvement over the standard item, although I think the central, circular display ...
of the resin were highlighted with a wash, careful painting, and light brushing (I was particularly pleased with the seats). I’m ...
pylons leaned inwards when they should hang vertically. I solved this issue by filling the original spigot holes with plastic ro ...
There are several braces and actuators that required detail painting, plus I scratch-built a couple of main gear door actuators ...
annealed copper wire around micro drill shanks, and securing with tiny blobs of canopy PVA at each end. Final touches were to ad ...
then framed with buff- painted Tamiya tape to give a neat edge. The various navigation lights were now dipped in Klear and paint ...
Clifton Curios Models Clifton Curios Models – Vintage Postcards & Ephemera tel. 01827 373497 (after 6p.m.) http://www.clifto ...
ACK Big Copper State Models 1/48 Armstrong Whitworth F.K.8 (Mid Production) Premium Edition by Huw Morgan T he 2-seater F.K.8 wa ...
the lack of integrated painting information tiresome. I had to flick back and forth to the illustration of the final assembly to ...
and top engine panels could be hinged open or left off; worth a try! Before fitting the cowl panels, I primed and painted both s ...
Inter-rib spaces were shaded with lightened XF-57. The rib lines themselves were highlighted with XF-57, darkened with 25% XF-52 ...
RIGGED FOR ACTION One of the most useful features of this kit must be the inclusion of the photo-etch rigging anchor points that ...
Most of the rigging can be completed without the upper wing in place, thanks to the etched attachment points. All the sub-assemb ...
complete. I chose to add minimal weathering, just some dust around the fuselage footsteps. CONCLUSION This is not a kit for a be ...
«
1
2
3
4
5
»
Free download pdf