Kürten, H. and Zehner, P. (1979) Slurry reactors. Ger. Chem. Eng. 2, 220–227.
Mashelkar, R.A. (1970) Bubble columns. Brit. Chem. Eng. 15, 1297–1304.
Mersmann, A., Schneider, G., Voit, H. and Wenzig, E. (1990) Selection and design of aerobic
bioreactors. Chem. Eng. Technol 13, 357–370.
Ostergaard, K. and Fosbol, P. (1972) Transfer of oxygen across the gas-liquid interface in gas-
liquid fluidized beds. Chem. Eng. J. 3, 105–111.
Pal, S.K., Sharma, M.M. and Juvekar, V.A. (1982) Fast reactions in slurry reactors: Catalyst
particle size smaller than film thickness: Oxidation of aqueous sodium sulphide solutions with
activated carbon particles as catalyst at elevated temperatures. Chem. Engng Sci. 37, 327–336.
Pandit, A.B. and Joshi, J.B. (1986) Mass and heat transfer characteristics of three phase sparged
reactors. Chem. Eng. Res. Des. 64, 125–157.
Poncin, S., Midoux, N. and Laurent, A. (1990) Hydrodynamics and residence time distribution in a
countercurrent gas-liquid bubble column partitioned with sieve plates. 10th International
Congress of Chem. Eng., Chem. Equip. Des. and Automation, CHISA ‘90, Prague.
Prokop, A., Eriksson, L.E., Fernandez, J. and Humphrey, A.E. (1969) Design and physical
characteristics of a multistage, continuous tower fermentor. Biotechnol. Bioeng. 11, 945–966.
Reith, T. and Beek, W.J. (1971) Gas hold-ups, interfacial areas abd mass transfer coefficients in
gas-liquid contactors. Proceedings of the 4th Europ. Symp. on Chem. React. Eng., pp. 191–202.
Pergamon Press, Oxford.
Roscoe, R. (1952) The viscosity of suspensions of rigid spheres. Brit. J. Appl. Phys. 3, 267–269.
Sada, E., Kumazawa, H. and Lee, H.C. (1986) Influence of suspended fine particles on gas holdup
and mass transfer characteristics in a slurry bubble column. AIChE J. 32, 853–856.
Sänger, P. and Deckwer, W.-D. (1981) Liquid-solid mass transfer in aerated suspensions. Chem.
Eng. J. 22, 179–186.
Schügerl, K., Lücke, J. and Oels, U. (1977) Bubble column bioreactors. In Advances in Biochem.
Eng. Vol.7 (Eds. Ghosh, T.K., Fiechter, A. and Blakeborough, N.), Springer Verlag, Berlin, pp.
1–84.
Schügerl, K. (1980) Neue Bioreaktore für aerobe Prozesse. Chem.-Ing.-Tech. 52 , 951–965.
Schügerl, K. (1983) Process design aspects and comparison of different bioreactors. In Mass
Transfer with Chemical Reaction in Multiphase Systems, Vol. 1 Two-phase systems (Ed. E.
Alper) pp. 525–552, Martinus Niijhof Publishers, The Hague.
Schügerl, K. (1983) Apparattechnische Aspekte der Kultivierung von Einzellern in Turmreaktoren.
Chem.-Ing.-Tech. 55 , 123–134.
Shah, Y.T., Stiegel, G.J. and Sharma, M.M. (1978) Backmixing in gas-liquid reactors. AIChE J. 24 ,
369–400.
Shah, Y.T. (1979) Gas-Liquid-Solid Reactor Design. McGraw-Hill, New York.
Shah, Y.T., Kelkar, B.C., Godbole, S.P. and Deckwer, W.-D. (1982) Design parameters estimations
for bubble column reactors. AIChE J. 28. 353–379.
Sittig, W. (1977) Untersuchungen zur Verbesserung des Stoffaustausches in Fermentern.
Verfahrenstechnik 11 , 730–740.
Sittig, W. And Heine H. (1977) Erfahrungen mit grosstechnisch eingesetzten Bioreaktoren. Chem.-
Ing.-Tech. 49 , 595–605.
Valentin, F.H.H. (1967) Absorption in Gas-Liquid Dispersions: Some Aspects of Bubble
Technology. E. & F.N. Spon Ltd., London.
Vlaev, S.D. and Zahradník, J. (1987) Energy effectiveness and working characteristics of different
tower reactors for aerated slurry systems. Collect. Czech. Chem. Commun. 52 , 2624–2639.
Westlake, R. (1986) Large-scale continuous production of single cell protein. Chem.-Ing.-Tech. 58 ,
934–937.
Wilkinson, P.M., Spek, A.P. and van Dierendonck, L.L. (1992) Design parameters estimation for
scale-up of high-pressure bubble columns. AIChE J. 38 , 544–554.
Zahradník, J. and Kaštánek, F. (1974) The effect of plates on some parameters of a heterogeneous
bed in bubble-type flow reactors. Collect. Czech. Chem. Commun., 39 , 1419–1425.
Multiphase bioreactor design 24