104 American Shooting Journal // August 2019
Step 15:
Insert spring guide/spring/
spring plunger assembly
into subframe, with spring
plunger pointing down.
Compress the spring with
the side of the screwdriver
and insert the spring
retention loop in place.Step 16:
Inspect safety lugs, and
insert safety into the
subframe while pulling/
pushing on the hammer.
Rotate safety clockwise
until it snaps in place.Step 17:
Install sear arm while it’s pointing up and rotate it down towards the hammer. Pull the hammer back and sit the sear arm in
place. Let the hammer rest on it in loaded position.Step 18:
Install sear, making
sure that sear spring
arm is pressing on
the shoulder. After
installation, sear will
be spring-loaded.