The Shed – September-October 2019

1RWDGL̇FXOWMREEXW

WKHQHZ+DUGLH*OD]H

SDQHOVDUHH[SHQVLYH

DQGQHHGFDUHLQ

KDQGOLQJPHDVXULQJ

DQGFXWWLQJ

Left: The enclosure stripped out and 10mm

laths added to all the joists and dwangs

Above: First HardieGlaze panel fitted and

glued in place

Below: Moving the hinge line 10mm involved cutting 10mm off
the right-hand end and gluing and pop riveting it to the left-
hand end. The two support fittings keep the channel level and
3mm clear of the supporting shelf on which the door sits

Below: Final check for plumb. The bottom screw thread

and the alignment rod in place