Stitch on perforated paper to make a 3D decoration.
Step 1 Step 2
Step 3 Step 4
MAKE A... CHRISTMAS TREE
ATTACH your beads by bringing the needle to
the front in the bottom left of a stitch. Push the
needle through the bead, and take it down at top
right. Repeat, and then secure the thread on the
reverse side before attaching the next bead.
CUT around the stitching carefully, leaving one
blank square of perforated paper outside of the
design. Use small, sharp scissors, and try to be
as accurate as you can, because the three sides
of the tree need to fi t together.
BEND each tree carefully at the centre, as shown
above, bringing the points around to almost
touching without making a fold at the centre.
Stick the first two trees together using fabric glue
or some double-sided tape.
FOLDa length of baker’s twine in half and knot,
and then place the hanger at the top of the tree,
with the knot facing downwards and below the
star. Attach the final tree with glue or double-
sided tape, enclosing the hanger at the top.
DECEMBER 2019
DMC Anchor Madeira
Cross stitch in two strands
518 1039 1106
519 1038 1105
C321 Étoile
C444 Étoile
C471 Étoile
C699 Étoile
C816 Étoile
C907 Étoile
Cblanc Étoile
Cecru Étoile
gold metallic
Backstitch in one strand (two on box)
C321 Étoile
Cblanc Étoile
Attach beads/sequins with cotton
red
Add beads and sequins
randomly on the tags and tree
3 1
S
u
s
a
n
P
e
n
n
y
Flip the tree horizontally to stitch
both sides of the tree, but as you
fl ip, only stitch the centre row of
stitches once. Make three
identical perforated paper trees.