20 McCall’s Quilting January/February 2020
2 Referring to Diagram II, sew together
1 green tone-on-tone and 1 black
small dot 3½” x WOF strip to make
a band. Make 6 bands total. Cut into
4 ½”-wide segments to make 48 units
total.
3 ReferringtoDiagramIII, join 4 A’s,
4 green B’s, 4 units, and a green C
as shown to make block. Make
12 blocks total.
Cutting Instructions
Patchesareletteredin orderof use.
Measurementsinclude¼ ̋ seamallow-
ances.Borderstripswillbepiecedand
cutto exactlengthneeded.Youmay
wantto makethemlongerto allowfor
piecingvariations.
= cutin halfoncediagonally
- Assortedprints
cuta totalof:
24 rectangles 2 ½ ̋ x 10 ̋
48rectangles1–2½” x 7 ̋
48rectangles1–2½” x 5½ ̋
48rectangles1–2½” x 3 ̋
169rectangles1–2½” x 7”for
border 2 - Greentone-on-tone
6 strips 3 ½ ̋ x WOFforbands
24 squares 6 ⅞ ̋ cut to make
48 triangles (B)
12 squares 4½ ̋ (C)
6 squares 3½ ̋ (E) - Black small dot
6 strips 3½ ̋ x WOF for bands - Black medium dot
8 strips 3½ ̋ x WOF for border 1
17 rectangles 3½ ̋ x 16½ ̋ (D) - Black solid
9 strips 2½ ̋ x WOF for binding
*You may need more strips depending
on how wide you cut them.
Piecing the Blocks
1 Referring to Diagram I and Making
String-pieced Fabric sidebar, string
piece 24 section 1’s using assorted
print 2½” x 10” rectangles for the
center strip and strips of varying
widths to fi nish fi lling the square. Trim
pieced section 1’s to 6⅞ ̋ square,
then cut in half once diagonally as
shown to make A. Make 48 A’s total.
Making String-pieced Fabric
String-pieced fabric is fun to make and uses lots of scraps.
Choose a variety of fabrics so you have lots of colors,
many different print sizes, and a good mix of color values
from light to dark. Strips can vary in width, they simply
need to be long enough to cover the foundation.
Cut a 7” square of paper to use as a foundation. Place
a 2½ ̋-wide strip of fabric right side up diagonally across
the square of paper. Place another strip of fabric on top
of the fi rst strip, right sides facing, and stitch ¼ ̋ from the
edge. Open, press, and add more strips in the same way
until the paper foundation is covered. Press, trim to 6⅞ ̋
square and remove the paper.
Cut 48
Section
Make 24
trim to 6⅞ ̋ square
Diagram I
Diagram II
Cut 48 4 ½ ̋
Unit Band
Make 6
DiagramIII
B B
C
Block Make 12