The world today is constantly on the move. It is impossible to
imagine life without the planes, trains, ships, and cars that transport
people and goods, every day. Each of these incredible machines
has been specifically designed to travel over land, through the
air, and under or over the water.
Transport
BY ROAD ▼
Most road vehicles have an internal-combustion engine, which burns fuel to
make the power that turns the wheels. In a car, the engine is usually in the
front and drives either the front or the back wheels. In a motorbike, the
engine is placed between the two wheels.
BY AIR
▼
To travel through the air, aircraft must overcome the force of
gravity, which pulls them towards the ground. They achieve this
with the help of curved wings and rotors, which produce an
upward force called lift as they pass through the air.
Air entering
through the
radiator grille
helps to cool
the engine
Steering wheel
is connected to
rods that turn
the front wheels
Rubber tyres are
reinforced with
nylon, rayon, or steel
to strengthen them
Front wheel is
held between
two metal arms,
called forks
Curved shape reduces
the effect of air
resistance
Handlebars turn the
front wheel to steer
the motorbike
Wheels are made from
steel or an alloy of
steel or magnesium
Engine drives the
rear wheel of
the motorcycle
Waste gases from the
engine are pushed out
through the exhaust pipe
Suspension
springs soften
the impact of
bumps when
driving over
rough surfaces
As the rotor
blades turn
they generate
lift to pull the
helicopter upwards
Front landing
wheels
Elevator’s flaps control
the up-and-down
movement of the plane
Rudder flap on
the back of the
tail fin balances
plane as it turns
Arm, called a
pantograph,
picks up electric
power from
overhead cables
Trucks, called bogies, have four
or more wheels, and large shock-
absorbers to give a smooth ride
Audi R8 2008
Yamaha V-Max
UH-60 BlackHawk
Boeing 777-300ER
TGV A325
122
Hinged surfaces,
called ailerons, tilt the
plane to make it turn
122_123_Transport.indd 122 03/01/19 12:10 PM