seam allowances at the curves. Trim
the headliner from the seam allow-
ances to reduce bulk.
- Repeat to stitch the opposite lining
side-panel long edge to the lining
back, but leave a 3"-long centered
opening for turning. - Turn the lining right side out; press.
- Repeat to construct the exterior
purse, but don’t leave an opening
for turning. - Position the velvet and lining flap
together; pin. Stitch the sides and
lower edges. Turn right side out;
press flat. - Baste the flap upper edges to-
gether using a ¼ " seam allowance.
Topstitch the flap sides and lower
edges using a ¼ " seam allowance. - Install rivets 1" apart along the top-
stitching according to the manufac-
turer’s instructions. Install grommets
at each pattern marking according
to the manufacturer’s instructions. - Position the flap over the exterior
back with velvet sides facing; pin.
Baste using a ¼ " seam allowance (B). - Position the lining and exterior bag
together with right sides facing; pin.
Mark the lining wrong side at each
grommet placement using tailor’s
chalk.- Install a zipper foot onto the
machine. Stitch the purse upper
edge (C). - Turn the purse right side out
through the lining opening. Slip
stitch the lining opening closed. - Insert the lining into the purse
exterior with wrong sides together.
Edgestitch the purse upper edge,
keeping the flap free from the
stitching.
- Install a zipper foot onto the
B CD
- Fold a ½ " pleat in each lining side at
the upper edge. Hand stitch 1" from
the upper edge along each pleat to
secure (D). - Insert one chain end through one
grommet from the purse lining side
and then into the other grommet.
Attach the chain ends together
using the chain clasp, making sure
it’s on the lining side.
DESIGN
Mylarpeacockfeather:PurelyGates,
PeacockPeacockFeathersFeatherswithwithMylarMylardesigndesignpack;pack;
purelygates.com
SOURCE
Fabric.comcarries automotive headlinerfabric:
fabric.com.
CMEMAG.COM 45