Australian Wood Review – September 2019

http://www.woodreview.com.au 29

PROJECT

3

2. After sketching, ideas were
   explored in 3D using rigid foam
   insulation – the final mock-ups
   are shown on the right along with
   some of the rejected ideas.


3. Using the bandsaw circle jig to cut
   the profile on the box sides.

Fig.2 Circle jig, not to scale

workpiece

hold down

opposite end

for second size box

pivot hole in turntable on pin in adjustable sliding key

locked to required radius with clamp

turntable

a second single sided turntable is for third box

offcut

bandsaw blade

batten

fixed to underside of platform

for clamping to bandsaw table

dovetailed track
set into platform

registration
block

registration
block