ALUMINUM VORTEC DISTRIBUTORS
No more wimpy plastic distributors for your truck! Our engineers have designed a Vortec
distributor with an aluminum housing which is stronger, more durable, and longer lasting
than the cost cutting plastic units made by the factory. No more stripping out your distributor
cap retaining screws when installing a new cap and rotor! Each housing is polished, providing
a high tech appearance. Includes our heavy duty brass terminal cap and rotor. Part No. 12625
1996-2003 SB V-8 Chevy & GMC, Part No. 12626 1996-2007 V-6 Chevy & GMC 1997-
Isuzu Hombre, 1996-2001 Olds Bravada, Part No. 12627 1996-2003 BB V-8 Chevy & GMCIT’S TIME FOR YOU TO START DRIVING
YOUR STREET TRUCK UNDER THE INFLUENCE
OF THE BEST IGNITION AVAILABLE!
GM 8-PIN COMPUTER DISTRIBUTOR
Performance Distributors is now building a new small diameter EFI compatible distributor. The
distributor comes with oil impregnated bushings insuring longevity and shaft rotation accuracy.
Each unit is hand checked with a feeler gauge in order to set the correct amount of end-play
between the distributor gear and the housing. This procedure prevents the distributor from binding
up and it also leads to a more precise magnetic pick-up signal. A brass terminal cap and rotor are
utilized for maximum conductivity. The brass terminals will also resist corrosion longer than stock
aluminum terminals. Caps are available in bright blue or black. The cap and rotor have excellent
dielectric strength and resist carbon tracking. The high output Dyna-Module is located inside the
distributor. The Dyna-Mod has more electronic dwell calibrated into it, allowing your ignition coil to
saturate longer, which in turn provides a more intense spark. Installs in minutes and plugs into your
stock wiring harness. Part No. 12620 1987-1998 V-8 Chevy & GMCCHEVY D.U.I. FOR CARBED ENGINES
4 HE#HEVY$ 5 )$ISTRIBUTORWASTHElRST ANDSTILLISTHEBESTPERFORMANCE(%)$ISTRIBUTOR)NFERIOR
copy cats have come and gone, but the D.U.I. remains the most popular choice for hot rodders
around the globe. A super smooth advance curve is machine calibrated, providing you with
instant throttle response, while eliminating engine damaging detonation. The 50,000 Volt D.U.I.
Coil teams up with our high dwell Dyna-Module, allowing you to run a massive .055” plug gap. 8, 6, &
4 cyl. applications are available. Part No. 12720 V-8 Chevy & GMC, Non-ComputerFORD “HOT FORGED” DISTRIBUTORS
Performance Distributors’ new Hot Forged Distributors encompass the toughness and
durability that your motor demands. Hot forging is superior to both casting and billet
PROCESSESBECAUSETHEMETALSNATURALGRAINmOWISDESIGNEDTOCONFORMTOTHESHAPE
of the product being made. As you forge a piece of metal, the high pressure collapses
the individual grains. This results in a denser, stronger, and more durable distributor.
Remember, “billet” is only another name for “lump of metal.” The term has been used
over the years by marketers to confuse the consumer. Part No. 18 4 57 198 4 -1990 5.
Ford Trucks, Part No. 18 4 58 1991-1996 5.0 Ford Trucks, Part No. 18 4 59 5.8 198 4 -
Ford Trucks, Part No. 18 4 60 5.8 1992-1997 Ford Trucks, Part No. 18 4 61 7.5L 1988-
and 7.0L 1990-1998 Ford TrucksSend $4.00 for complete Catalog and Prices.
2699 Barris Drive - Dept. TK.
Memphis, TN 38132
Phone: 901-396-
[email protected]
http://www.PerformanceDistributors.com