TechLife Australia – September 2019

(Jacob Rumans) #1

[WWW.TECHLIFE.NET] [ 067]


05


SWITCH TO WIRED CONNECTIONS
Wireless is convenient, but it’s no match for a reliable cabled
connection. If you have devices with Ethernet ports close to the router


  • like a desktop computer or console – connect them directly to a local area
    network (LAN) port on the router using a Cat 5e cable or better to reduce the load
    on your Wi-Fi network.


01


REPOSITION YOUR ROUTER
Think about where your router is placed – aim to position it as
centrally as possible (if in a two-storey home, that means high up
on the ground floor to improve its signal range upstairs). Also place it on a
wooden shelf rather than brick or glass, as the latter materials are harder for
Wi-Fi signals to pass through.


03


CHANGE WI-FI CHANNELS
If you determine your 2.4GHz network needs moving to a less
crowded channel, use your router’s configuration utility and look for
the channel settings in the Wireless or Wi-Fi section. If a Channel Width setting is
provided, make sure it’s 20MHz to reduce the risk of interference.


06


EXPAND WIRED DEVICES
Most routers offer no more than four LAN ports to connect to wired
devices. Network switches allow you to connect five to eight devices
to a single LAN port without performance penalty. Invest in a Gigabit Ethernet
switch for max transfer speeds, like the TP-Link TL-SG105S, which offers five
ports for under $30.

02


ADJUST ANTENNAS
If your router has two or more external antennas, align one
vertically and the other horizontally to see if that boosts the range
further. Also consult your router’s support website to see if you can upgrade
its supplied antennas with more powerful ‘high-gain directional’ replacements
to boost the signal.

04


PURCHASE A WI-FI EXTENDER
Relay devices cost around $70 for dual-band models – try to go for the
same make as your router and manage them using the manufacturer’s
app. Place the extender halfway between the router and the area where the signal is
poor – if the signal remains weak, try moving the relay closer to the router.

[STEP BY STEP]


Six easy improvements you can make


IMPR

OVE

YOU

R

HO

ME

NE

TW

OR

K
Free download pdf