move M1 to last st worked, leaving rem
sts on hook.Modified return pass (mod RetP 2):
[Yo, draw through 2 lps] across to M1,
[drop lp from hook, insert hook in back
horizontal bar of next st on foundation
row, place dropped lp on hook (3 lps on
hook), yo, draw through 3 lps on hook]
2 times, move M1 to last st worked, leav-
ing rem sts on hook.Increase (inc): Insert hook bet next
front and back horizontal bars, yo, pull
up lp.Double increase (double inc): Inc (see
above), tss in next marked st, move m to
st just made, inc.End stitch (end st): Insert hook behind
both front and back vertical bars of last
marked stitch, yo, pull up lp.Tunisian simple stitch slip stitch
bind off (tss sl st bo): Insert hook
through front and back vertical bars of st,
yo, pull up lp, draw lp through lp on hook.Linked double crochet (ldc): Insert
hook in horizontal bar of last st made,
yo, pull up lp, insert hook in indicated st,
yo, pull up lp, (yo, draw through 2 lps on
hook) 2 times.BANDANA
Foundation row: With MC and Tunisian
hook, ch 55 (61, 67), working in back
ridge lps, pick up lp in 2nd ch from hook
and in each rem ch across—55 (61, 67)
lps; RetP. Row 1: Tss 24 (26, 28), place
marker 1 (pM1) in last lp picked up, tss,
pM2, tss 2 (3, 4), pM3, tss 2 (3, 4), pM4,Wee Bandana
P. K. OlsonDIFFICULTY
FINISHED SIZE 11 (13, 15)" neck
opening circumference.
YARN Omega-Tamm Nevado
(distributed by Creative Yarn
Source) (88% acrylic, 12%
polyester; 213 yd [195 m]/1¾ oz
[50 g]; ): #86 jade (MC) and
#48 deep red (CC), 1 ball each.
HOOKS Size 7 (4.5 mm) Tunisian
hook, 24" cable; sizes E/4
(3.5 mm) and 7 (4.5 mm)
standard crochet hooks. Adjust
hook size if necessary to obtain
correct gauge.
NOTIONS Removable stitch
markers (m), 5; yarn needle.
GAUGE 19 tss and 18 rows = 4" in
patt.NOTES
—See the Glossary on page 78 for
terms you don’t know. Visit our
master glossary at http://bit.ly/
iwc-glossary.—Beginning with Row 1, bandana is
worked back and forth in a method
similar to short-rows. Stitches picked
up prior to marker placement on
Row 1 will be worked off as bandana
progresses.STITCH GUIDE
Modified return pass (mod RetP 1):
[Yo, draw through 2 lps on hook] across
to M1, drop lp from hook, insert hook in
back horizontal bar of next st on founda-
tion row, place dropped lp on hook (3 lps
on hook), yo, draw through 3 lps on hook,with fabric sleeves and pin crocheted
cover to fabric sleeves. Use sewing needle
and clear thread to sew crocheted cover
to fabric sleeves. Cover will remain on
journal for remainder of assembly.With RS of trim piece showing, and using
permanent marker, working across long
side, carefully mark ¼ " from top left,
continue marking every ¼ " across long
side. Rep for opposite edge of trim piece.With leather punch and RS of trim piece
facing, punch hole at each mark on trim
piece.With journal open facedown, center trim
over assembled cover. Cut a 3" length of
braided elastic and fold in half. Leaving
¾ " loop and using photo as a guide (see
p. 69), place ends of folded elastic under
right side edge of trim and pin elastic to
crocheted cover. Remove trim piece and
thread sewing needle with clear thread.
Sew braided elastic to crocheted cover
using sewing needle and clear thread.Center trim piece over center of
crocheted cover being sure to cover sewn
ends of braided elastic loop. Using yarn
needle and yarn, and using photo as a
guide, sew trim piece to center of
crocheted cover. Weave in ends. Dana Rushold, former editor of Love of
Crochet magazine, loves knitting to relax
and crocheting to create fun and sometimes
quirky designs.70 Interweave Crochet • Winter 2020W
a
rm
h
e
a
rt
e
d
G
if
ts