Simply Cards & Papercraft - UK (2020-01)

Technique

You’ll need Congrats
● white, pink & blue cardstock
● Lawn Fawn Lawn Cuts
Scripty Congrats die set
● Card Making Magic Layered
Florals stamp set
● Tuxedo Black
Memento inkpad
● Copic markers
● acetate
● 3D foam pads
● manual die-cutting machine

Simply make
1 Stamp several leaves and
 owers in a random pattern
to cover a 13cm square of
white cardstock. Colour using
Copic markers then layer
onto a 13.5cm square of
pink cardstock.
2 Position the ‘Congrats’
sentiment die 3cm from the
top of the stamped panel and
secure using low-tack tape.
Die-cut then remove the die,

Hello

You’ll need

● white & purple cardstock

● Gemini Expressions Hello die

● Clearly Besotted Stamps April Showers

stamp set

● Tuxedo Black Memento inkpad

● Copic markers

● acetate

● 3D foam pads

● manual die-cutting machine

Simply make

1 Stamp  ve umbrellas onto a 10.5x13.5cm

piece of white cardstock as shown

and colour using Copic markers. Layer

the panel onto a slightly larger piece of

purple cardstock.

2 Place the ‘Hello’ sentiment die in the

centre of the stamped panel and hold it

in place with low-tack tape. Die-cut then

remove the die, ensuring to place the

offcuts from the letters to one side.

3 Open out a white 11.5x14.5cm card blank

and place the die-cut panel centrally onto

the card front. Secure using low-tack

tape and position the die back inside the

aperture. Die-cut to create an identical

aperture from the card front. Remove the

tape to separate the layers.

4 Cut a 9.5x7cm piece of acetate. Attach

to the card front to cover the aperture.

Cut an 11x14cm piece of purple cardstock

and adhere to the inside panel of the card.

5 Place the stamped panel onto the card

front ensuring the apertures are lined

up. Reinsert the offcuts from inside the

letters to  nish.

ensuring to put the offcuts

from the letters to one side.

3 Open out a white 14cm-

square card blank and place

the die-cut panel centrally

onto the card front. Secure

using low-tack tape and

position the die back inside

the aperture. Die-cut to

create an identical aperture

from the card front. Remove

the tape to separate

the layers.

4 Cut an 11x7cm piece of

acetate and attach to the

card front to cover the

aperture. Adhere a 13.5cm

square of blue cardstock

to the inside panel of the

card blank.

5 Place the stamped panel

onto the card front ensuring

the apertures are lined up.

Reinsert the offcuts from

inside the letters to  nish.