Vette – July 2019

VETTEWEB.COM 27

15

Apply the new sealant all the way
around the side and rear mounting
surfaces of the evaporator core.

16

Install the new rubber grommets
and inspect to see if any air gaps
remain. Applying some of the sealant
rope around the tubes effectively closes
off any air gaps.

17

The GM Service Manual says to put
3 ounces of compressor lubricant
into a new evaporator when it’s installed.
My preference is for mineral oil when
using R-12 in older systems. http://www.ebcbrakes.com

THE ONLY BRAKES

MADE THIS WAY

Kevlar®based low abrasion, low dust, high

performance compound in a choice of

different blends for every driving style

and vehicle

Edge chamfers for reduced chatter

and improved pad

contact

Unique "Brake-In™"

coating conditions rotors

fast at pad install and

seats new pads quicker

NUCAP®NRS®hook

finished backing plates

for superb bond strength

and zero chance of pad

de-bond

Noise shims on piston side

of pad for totally silent

braking

Combine your choice of these quality UK made EBC pads with our sport

rotors which arrive with “thermic black” corrosion resistant coated finish

for great looking brakes that COST less and STOP faster.

Buy ONLINE or from your favorite

performance store or order at Autozone.

GD BSD

USR RK