Lacy set
Work 2 loose cords: Work chain stitches
for approx. 2 0 -25cm (8- 10 in), turn and
work back with 1 sl st in each chain
stitch. Cut the strand and work 1 more
cord in the same way.
Sew 1 cord to the inside of the right side
in the side and 1 cord on the outside of
the left side in the side. Make sure the
two cords are at the same height.
Slipper (make 2)
The slipper is worked back and forth
with a circular needle from mid back,
XSTHS[R MI]SYƤVWX[SVOXLIPIKXLIR
the foot.
Using 2.5mm (UK 12 /1 3 , US C/2 or B/1)
circular needle, cast on 3 6 ( 38 : 40 : 44 :
48 : 52: 56) sts.
Work A.2 (2 sts) over all stitches.
When A.2 has been worked once in
height, work the next row from the RS
as follows:
Work 2 (3: 0 : 2: 0 : 2: 0) sts stocking
stitch, A.3 (8 sts) a total of 4 (4: 5: 5: 6 :
XMQIWMR[MHXLERHƤRMWL[MXL
0 : 2: 0 : 2: 0) sts stocking stitch.
Note Remember the knitting tension.
When A.3 has been completed once in
height, work A2 as follows:
Knit 0 (1: 0 : 0 : 0 : 0 : 0) sts, A.2 over the
next 3 6 ( 36 : 40 : 44 : 48 : 52: 56) sts and
ƤRMWLF]ORMXXMRK
WXW
(the cord is later threaded through this
row of holes).
When A.2 has been completed in height,
work 2 ridges back and forth as follows:
1 ridge = Knit 2 rows.
Decrease 6 (8: 6 : 6 : 10 : 10 : 14) sts
evenly on the last row from the RS.
30 ( 30 : 3 4 : 3 8 : 3 8 : 4 2: 42 ) sts
Cut the strand.
2S[TPEGIXLIƤVWX
1 5: 15 ) sts and the last 11 (11: 1 2: 1 3:
1 3: 1 5: 15 ) sts on two separate threads.
The piece is now worked in garter stitch
XSƤRMWLIHPIRKXL
;SVO
GQ }
1 ½: 1 ¾: 2: 2½: 3)in over the middle
WXW QMHXSTSJ
slipper), cut the strand.
The next row is worked from the RS as
follows: Work the stitches from the one
thread in the one side back onto the
double pointed needles, knit up 7 (9: 10 :
11 : 1 3: 16 : 21) sts in the outermost loop
of the outermost stitch along the side
of the middle piece, work the 8 (8: 10 :
1 2: 1 2: 1 2: 12 ) sts on the needle (front),
knit up 7 (9: 10 : 11 : 1 3: 16 : 21) sts in the
outermost loop of the outermost stitch
along the other side of the middle piece
and work the stitches from the other
thread back onto the double pointed
needles. 44 (48: 5 4 : 60 : 64 : 74 : 84) sts
Note The piece is now measured
JVSQLIVIWork a total of 2.5 (3: 3: 4 : 5: 5: 5)cm,
} } ~
MRKEVXIVWXMXGL
over all stitches AT THE SAME TIME
when you have worked approx. 1 (1.5:
GQ} ~ ~
MR
insert 1 marker 22 ( 24 : 2 7 : 3 0 : 32: 3 7 :
42 ) sts in (middle of slipper).
2S[HIGVIEWIIZIV]RHVS[XSƤRMWLIH
length as follows:
K1, k2tog (1 stitch decreased), knit until
there are 2 sts left before the marker,
k2tog twice (2 sts decreased), knit
until there are 3 sts left, k2tog (1 st
decreased), k 1.
= 4 stitches decreased every 2nd row
Approx. 32 ( 36 : 4 2: 48 : 52: 6 2: 72 ) sts
left on needle
Cast off and sew the seam under the
foot and up mid-back in the outermost
loop of the outermost stitch so the
WIEQMWƥEXCord
Using 2.5mm (UK 12 /1 3 , US C/2 or B/1)
crochet hook, work chain stitches for
approx. 3 0 - 40 cm (12- 16 in), turn and
work back with 1 sl st in each chain
stitch. Cut and fasten the strand.
Thread the cord in and out of the rowSJLSPIWSRXLIWPMTTIV WXEVXERHƤRMWL
mid-front of slipper).Shorts
The piece is worked in the round with
double pointed needles, top down.
Using 2.5mm (UK 12 /1 3 , US 1/ 2 )
double-pointed needles, cast on 80 ( 96 :
96 : 11 2: 11 2: 12 8) sts.
Insert 1 marker at the beginning of the
round (mid-back).
Work rib from mid-back as follows:
Knit 1, *p2, k2*; rep from * to * until
XLIVIEVIWXWPIJXƤRMWL[MXLTO
When the rib measures 2 (2: 2: 3: 3:
3 )cm, ¾ (¾: ¾: 1 : 1 : 1)in, work a row of
holes for the cord on the next round as
follows: *K1, yo, p2tog, k1*; rep from * to
* to end of round.
Work 1 round of k2/p2 rib.
Then work an elevation in the rib at the
back as follows:
Work 7 (9: 9: 9: 9: 9) sts, turn, tighten
the strand, work 14 (18: 18 : 18 : 18 : 18)
sts back, turn, tighten the strand, work
WXWXYVRXMKLXIR
the strand, work 2 6 ( 30 : 3 0 : 3 0 : 3 4 :
WXWFEGOXYVRXMKLXIRXLIWXVERH
work 32 ( 36 : 3 6 : 3 6 : 4 2: 42 ) sts, turn,
tighten the strand, work 3 8 (42: 4 2: 4 2:
50 : 50) sts back.
Continue like this, i.e. work 6 (6: 6 : 6 :
8 : 8) more sts each time the piece is
turned until you have worked over a
total of 62 (66: 66 : 66 : 8 2: 82 ) sts. Turn,
tighten the strand, then continue with rib
in the round over all stitches again.
When the piece measures 4 (4: 5: 5: 5:
5 )cm, 1 ½ (1½: 2: 2: 2: 2)in mid-front,Slipper charts A.2 & A.3
A.2A.3A.2A.3Key
= k from RS, p from WS
= k from WS
= yo
= skpo
= k2tog
= sl, k2tog, psso