A
MATERIALS
Supplies listed are enough to make one
decorative jar.
+Felt fabric
+Mason jar
+Cut-away stabilizer
+Thread: bobbin & glow-in-the-
dark (See “Source.”)
+Tap e mea su r e
+Removable fabric marker
+75/11 embroidery needle
+Embroidery design (approx.
1½ "×3"; see “Designs.”)
PREPARE
- Measure from the jar base to just
below the threading to determine
the felt height; record. Measure the
jar circumference. Subtract 1" from
the jar circumference; record as the
felt width. - Cut the felt fabric to the recorded
dimensions.
EMBROIDER
- Download the Spooky Spy Eyes
designs from cmemag.com/freebies
until Oct. 31, 2019. Load the designs
onto the embroidery machine. - Hoop a piece of cut-away stabilizer.
- Place the felt center over the
stabilizer center. Secure in place
with tape. - Thread the machine with glow-in-
the-dark thread and the bobbin
with 60-wt. bobbin thread. Install a
new embroidery needle. - Embroider one set of eyes.
CONSTRUCT
- When the stitching is finished, re-
move the materials from hoop and
cut around the eye embroidery,
leaving a small amount of stabilizer
around the perimeter (A). - Overlap the short ends of the em-
broidered felt and insert it into the
jar with the eyes facing out. Trim
the felt as needed to fit the jar. - Repeat to construct the remaining
two jars.
DESIGNS
Download the Spooky Spy Eyes designs from
cmemag.com/freebies until Oct. 31, 2019. The
designs will be available after the expiration
date at sueoverydesigns.com.
SOURCE
Sulky of America supplied the glow-in-the-
dark thread: sulky.com.
Download the Spooky Spy
Eyes design from cmemag.
com/freebies until Oct. 31,
- Purchase the designs
at sueoverydesigns.com
after the expiration date.
CMEMAG.COM 45
Untitled-2 45Untitled-2 45 6/28/19 10:21 AM6/28/19 10:21 AM
A
MATERIALS
Supplies listed are enough to make one
decorative jar.
+Felt fabric
+Mason jar
+Cut-away stabilizer
+Thread: bobbin & glow-in-the-
dark (See “Source.”)
+Tap e mea su r e
+Removable fabric marker
+75/11 embroidery needle
+Embroidery design (approx.
1½ "×3"; see “Designs.”)
PREPARE
- Measure from the jar base to just
below the threading to determine
the felt height; record. Measure the
jar circumference. Subtract 1" from
the jar circumference; record as the
felt width. - Cut the felt fabric to the recorded
dimensions.
EMBROIDER
- Download the Spooky Spy Eyes
designs from cmemag.com/freebies
until Oct. 31, 2019. Load the designs
onto the embroidery machine. - Hoop a piece of cut-away stabilizer.
- Place the felt center over the
stabilizer center. Secure in place
with tape. - Thread the machine with glow-in-
the-dark thread and the bobbin
with 60-wt. bobbin thread. Install a
new embroidery needle. - Embroider one set of eyes.
CONSTRUCT
- When the stitching is finished, re-
move the materials from hoop and
cut around the eye embroidery,
leaving a small amount of stabilizer
around the perimeter (A). - Overlap the short ends of the em-
broidered felt and insert it into the
jar with the eyes facing out. Trim
the felt as needed to fit the jar. - Repeat to construct the remaining
twojars.
DESIGNS
Download the Spooky Spy Eyes designs from
cmemag.com/freebies until Oct. 31, 2019. The
designs will be available after the expiration
date at sueoverydesigns.com.
SOURCE
Sulky of America supplied the glow-in-the-
dark thread: sulky.com.
Download the Spooky Spy
Eyes design from cmemag.
com/freebies until Oct. 31,
- Purchase the designs
at sueoverydesigns.com
after the expiration date.
CMEMAG.COM 45