- Align the exterior base and exterior
main panel with right sides to-
gether; pin. Stitch, clipping into the
basting stitches as needed to fit the
curved edges together. - Repeat to stitch the lining main
panel and base. - Insert the lining into the exterior
basket with right sides together and
aligning the seamlines; pin. Stitch
the upper edge. - Turn the basket right side out
through the lining opening. Hand
stitch the opening closed using an
invisible stitch. - Topstitch ½ " from the upper edge.
- Select a 4.0mm stitch length. To
secure the exterior to the lining,
stitch in the ditch along the exterior
panel upper and lower seamlines
(A). If needed, roll down and pin
the basket upper edge to reach the
lower-panel seamline. - Position one exterior handle and
one lining handle with right sides
together; pin. Stitch the perimeter,
leaving a 2"-long opening for
turning. - Turn the handle right side out
through the opening. Push out the
corners using a point turner. Press
flat, and then topstitch along the
perimeter. - Repeat to construct the remaining
handle. - Position each handle on opposite
sides of the basket exterior; pin.
Stitch each handle short end with
a centered square with an X inside
the square to secure.
DESIGN
Built-in design from the Brother PE 770
machine, available at ibroidery.comA
64 CMEMAG.COM | Fall 201962-65_CME_F19_Harvest Home Basket.indd 6462-65_CME_F19_Harvest Home Basket.indd 64 6/28/19 10:26 AM6/28/19 10:26 AM- Align the exterior base and exterior
main panel with right sides to-
gether; pin. Stitch, clipping into the
basting stitches as needed to fit the
curved edges together. - Repeat to stitch the lining main
panel and base. - Insert the lining into the exterior
basket with right sides together and
aligning the seamlines; pin. Stitch
the upper edge. - Turn the basket right side out
through the lining opening. Hand
stitch the opening closed using an
invisible stitch. - Topstitch ½ " from the upper edge.
- Select a 4.0mm stitch length. To
secure the exterior to the lining,
stitch in the ditch along the exterior
panel upper and lower seamlines
(A). If needed, roll down and pin
the basket upper edge to reach the
lower-panel seamline. - Position one exterior handle and
one lining handle with right sides
together; pin. Stitch the perimeter,
leaving a 2"-long opening for
turning. - Turn the handle right side out
through the opening. Push out the
corners using a point turner. Press
flat, and then topstitch along the
perimeter. - Repeat to construct the remaining
handle. - Position each handle on opposite
sides of the basket exterior; pin.
Stitch each handle short end with
a centered square with an X inside
the square to secure.
DESIGN
Built-in design from the Brother PE 770
machine, available at ibroidery.com
A
64 CMEMAG.COM | Fall 2019