BHG.COM/DIYMA G A Z I N E DO IT YOURSELF Summer 2020 23
Watching is the best
way to learn to tie a
knot, so we searched
the name of the
knot online, then
watched a video on
how to tie it. Search
for yourself, then
use these knots
in your designs.
KNOW YOUR KNOTS
CONSOLE COVER Stretchy
cord adds a fun look to
furniture while keeping
items accessible, left. First,
determine how much space
you want to cover with the
cord. Place masking tape on
the top of the unit and mark
an odd number of spots at
1-inch intervals for the holes.
Repeat on the bottom of the
unit. Using a bit slightly larger
than your cord, carefully
drill each hole, then remove
the tape and wipe off any
dust and splinters. Heat-
seal one end of a length of
1/8-inch bungee cord, then
thread the cord through the
holes as shown, starting at
the top. Add a decorative
bead and knot at one end,
then pull the cord taut, trim
and repeat on the opposite
end. Heat-seal both ends.
STRIKE A CORD Add a unique design
to your walls with colorful cords,
opposite. Use a pencil and a level to
mark spots for the knobs (we used
front-mount ceramic drawer pulls)
2 inches apart in vertical lines. For
a 90-degree corner, fi rst mark the
location of the knob for the bottom
line, then measure up 2 inches and
over 2 inches (toward the inside of
the angle) and mark again. Repeat
for each line. Install the knobs. Run
the cord (we used about 12 feet
of ¼-inch Para-Max cord for each
line) along the pattern, wrapping it
around each knob and leaving the
ends free. To keep long expanses
of cord from sagging, pin in place
with a brass nail. To fi nish the ends,
secure the cord in clear plastic
¼-inch cable clamps and screw to
the wall a few inches beyond the
fi rst and last sets of knobs.
You don’t have to be a sailor to tie an impressive knot. These
three may look complicated, but they are easy to learn.
CELTIC
BUTTON
KNOT
DOUBLE
FISHERMAN’S
KNOT
TWO HALF
HITCHES
22-28_Straps_Cords.indd 23 FINAL 2/12/20 12:39 PM