11 / MOUNT ON FAN MOUNTS
This will allow the greatest flexibility in terms of adjustment,
especially if the case features adjustable fan mounts. You’ll need
to use screws and nuts, as there are no threaded holes here. Most
reservoirs should come with these parts, but if not, you should be able
to get them from most hardware stores.14 / USE MOUNTING TAPE
Using mounting tape is easier than drilling your case, but it’s trickier to
remove. Cut strips of tape and make use of as much surface on the
reservoir or mounting brackets as possible. Once mounted, apply
moderate force to the reservoir to check it’s secure enough. If not,
you’ll need to use screws and bolts.12 / DRILLING YOUR OWN HOLES
If you need to mount your reservoir in a location not equipped with fan
mounts, you’ll likely need to drill some holes to mount it. Mark up the
holes using the mount as a template. You may wish to try step 14 first,
though, as this method can save drilling holes in your case.15 / INSTALL RESERVOIR
Finally, whether using fan mounts, drilled holes or mounting tape, you
can go ahead and install your reservoir and connect it to your water-
cooling system. If you have a spare port on the reservoir, you can also
use this port to connect a leak-testing tool.MODDING / HOW TO GUIDES
10 / MOUNTING ON FANS
If the fans are mounted on a radiator, you’ll need to use the same long
screws that came with your radiator to mount the reservoir. These screws
pass through the mount and fans, and then secure to the radiator. If the fans
stand alone, you’ll need to use standard fan screws and secure the mount
directly to them instead, as shown.13 / DRILL HOLES
Once you’ve made sure there’s enough space to mount the reservoir,
and that it won’t interfere with any cable routing or components, create
your holes using a drill bit the same size as, or slightly larger than, the
screw threads you’ll be using.