CUT THE FRONT
With the main frame done, we can now add the front
of the frame. This has two functions: it covers the
bezel on the monitor, making it look a bit better
aesthetically, and acts as a lip to hold the monitor and
mirror in place. Make sure the material is deeper than
the wood for the frame to make this lip, and cut the
ends at an angle for when you join them all together.
STEP 04:STEP 01:
AT TAC H
THE FRONT
Carefully nail on the front pieces, making
sure they’re flush to the edge of the outside.
Do one nail at each end first to make sure it is
orientated correctly (don’t nail it in fully until
you’re sure), or use a vice lightly gripping it
all together. Once you’ve done a couple of the
pieces, the other two will be easier to get right.STEP 05:
BUILD YOUR OWN MAGIC MIRROR Feature
raspberrypi.org/magpi The Official Raspberry Pi Projects Book 125