- Press one backing corner so the
tip meets corner of marked seam line
(Diagram 8); unfold. Trim on pressed
line. Repeat with remaining corners. - Fold backing edges^1 ∕ 4 " toward
quilt top; press (Diagram 9). Fold
one pressed backing edge over
batting, covering marked seam line
(Diagram 10); pin.
FINISH QUILT
- Using^1 ∕ 2 " seam allowance, sew
together long edges of solid navy
34 ×91" rectangles to make a 91 ×100"
quilt backing. Layer quilt top, batting,
and backing; baste. (For details, see
Complete Quilt, page 103.) - Quilt as desired. The quiltmaker
hand-tied the quilt at the center of
the hexagon shapes formed by six
triangles. See photo, above. - Instead of adding traditional
binding, the maker of this antique
quilt used the backing to create a
wide binding that looks like a border.
To use this method, mark a seam line
(^1) ∕ 4 " inside quilt top edges (red dotted
lines in Diagram 7). Trim batting 1^1 ∕ 2 "
beyond quilt top edges and backing
31 ∕ 2 " beyond quilt top edges. (To avoid
cutting into the backing when cutting
batting, slip the edge of your rotary-
cutting mat between the two.)
- Fold adjacent backing edge over
batting to make a mitered corner
(Diagram 11). Topstitch^1 ∕ 8 " from folded
edges through all layers; topstitch^1 ∕ 8 "
from mitered corner folds. Repeat with
remaining edges to complete quilt.
Quilt collector: Jody Sanders
11 /
" 2
1 / 3
" 2
11 / 2 "
31 / 2 "
(^11) / 4 "
"/ 4
Diagram 7
Diagram 8
Diagram 9
Diagram 10
Diagram 11
96 APQ ¥ August 2019