Analysis and Design of a Modern SCADA System

(fajer) #1



    1. 4 Performance Metrics:
      The performance metrics used to measure the performance of the
      routing protocol are:

    2. FTP Response time – The time elapsed between sending a file
      and receiving the response. The response time for responses sent
      from the server to an FTP application is included in this statistic
      in second(sec).

    3. Route Discovery time– This statistic represents the time to
      discover a route to a specific destination and is measured in
      second (sec).

    4. Total Packet dropped – When no route is found to the destination
      or the next hop reachability confirmation is not received after the
      maximum number of attempts is reached, the node drops the
      packets queued to the destination. This statistic represents the
      total number of application packets discarded by this node.

    5. Routing traffic sent –The amount of routing traffic sent of DSR
      routing protocol in bits/sec.

    6. Total Routing traffic sent – The total amount of DSR routing
      protocol traffic sent (control + data) in bits/sec.

    7. Routing traffic received–The amount of routing traffic received
      in bits/sec.

    8. Total Routing traffic received– The total amount of traffic
      received (control + data) in bits/sec.

    9. WirelessLAN.Data Dropped (retry threshold exceeded)–the
      higher layer data traffic (in bits/sec) dropped by the WLAN
      MAC due to consistently failing retransmissions. This statistic
      reports the number of the higher layer packets that are dropped
      because the MAC couldnot receive any acknowledges (ACKs)
      for the (re)transmissions of those packets or their fragments, and



Free download pdf