Analysis and Design of a Modern SCADA System

(fajer) #1

6 BADOOSH 41 4.15 8 - 136.58
7 Al_RASHEDIA 9 0.2 6 - 124.54
8 SHEMAL AL_MOSUL 8 0.15 -119.44
9 Al_SHARQIA 8.1 0.208 - 1 23.52
10 Al_MANSOOR 9 0.2 3 - 124 .5
11 MOSUL400 25 0.8 -129.54
12 AL-TAHRER 8 0.2 -122.36
13 YAREMGA 16.5 0.8733 -129.81
14 QARAQOOSH 22 2.0 -129.81
15 HAMAM AL_ALEEL 24 1.8 -132.88
16 Repeater 27 2.6 -134.5
17 AL_ADAIA 43 2.8 -134.5
18 AL_MESHRAQ 31 3.0 -133.42
19 AL_QAYARA 23.5 5.0 -137.3
20 AL_SHERKAT 45 5.5 -137.28
21 IT1A 22 1.16 -131.1
The experiment was conducted using an area space of (190
kilometers*130 kilometers). The node sizes used were 1 server,1 Repeater
node, and 19 substations, which sent FTP packets (File Transfer Protocol)
as (2files/min). The packet lengths used to investigate traffic loads were up
to each station FTP data file. The data rate used by the MAC for
transmission of data frames via physical layer was 11 Mbps; the simulation
was carried out in 900 seconds of simulation time.


3.9.6 Simulation Results and Discussion


Figure 3.1 5 represents DSR routes from the SCADA nodes to the
server(Mosul400),where each node may have one or more routes to the
server in its routing table.Table 3.10 listssimulated results after simulation,

Free download pdf