Bob Drake Catalog

DOORS

http://www.bobdrake.com

1940     Convertible

DOOR GLASS REPAIR CHANNEL

Die-formed steel as original. Holds

and supports glass at bottom of door

window. Requires using your original

or fabricating mounting tabs required

at each end. 233/8" long, 2 per car.

01A-6621468 $40.00 each

1935-36 Roadster & Phaeton

DOOR POST FLOOR BRACES

Die-stamped steel in exact

original shape. Revives door and

hinge support.

48-7010116/7 $90.00 pair

All Body Styles

To determine thickness needed, measure the width of glass,

then the width of the channel that glass fits into. Subtract the

width of glass from the width of channel and divide this figure

by two. This equals tape thickness. For best results, tape should

be slightly larger than the gap. Sold in 20' x 11/2" wide roll.

GLASS SETTING TAPE

A must for properly sealing

glass into window or

windshield frame. Special “all

rubber” formula designed to

look and perform like original

Ford factory type, creating

a water tight bond as it

cushions the glass. Fold tape

over glass edge and insert

glass into frame. Excess can

be easily trimmed.

B-37193-A 1/32" thick B-37193-C 1/16" thick

B-37193-B 3/64" thick B-37193-D 5/64" thick

$15.00 per roll

DOOR HINGE PIN

PULLER

This very handy tool is

made of forged steel

with a heat treated

bolt. Remove those

stubborn pins without

damage to the hinge

or paint. Hardened

steel extensions

included.

TL-100 $28.00 each

1937-40 Closed Car, 19 37-47 Pickup
& Other Non-Fords
36" DOOR GLASS REPAIR CHANNELS
Repair your rotted window retainers with this 3 ft. straight
length. Can be cut in half to repair two windows for most
coupes, pickups and fordors. Most tudors and convertibles
use one per window. All die-formed steel, finished in our
corrosion resistant black.

01A-7021470 $40.00 each

1940     Convertible

DOOR GLASS REPAIR CHANNEL

Die-formed steel as original. Holds and supports

glass at bottom of door window. Requires

adding your original mounting tabs at each end.

233/8" long, 2 per car.

01A-6621468 $40.00 each

DOOR HINGE PIN PULLER EXTENSIONS

Set includes 4 hardened steel extensions, one each

in the following lengths;

1", 1 1/2", 2", 2 1/2"

TL-100-P $5.00 set