Bob Drake Catalog

Back of frame detail

WINDOWS

http://www.bobdrake.com

STAINLESS OUTSIDE WITH INSIDE PAINTED TAN

1932 Roadster, Phaeton & Convertible Sedan B-37639-P

1933-34 Roadster, Phaeton & Cabriolet 40-765132-P
1935-36 Roadster & Phaeton 48-715446-P

1940 Ford/Merc Convertible 01A-6653220-P
1941-48 Ford/Merc Convertible 11A-7653220-P

$255.00 each

ALL STAINLESS STEEL

1932 Roadster, Phaeton & Convertible Sedan B-37639-SS
1933-34 Roadster, Phaeton & Cabriolet 40-765132-SS
1940 Ford/Merc Convertible 01A-6653220-SS

$295.00 each

B-37193-A 1/32" thick B-37193-C 1/16" thick

B-37193-B 3/64" thick B-37193-D 5/64" thick

$15.00 per roll

WINDSHIELD

78-741290-GP 1937-40 Convertible & Station Wagon

01A-7003110-GP 1940 Closed Car & Pickup

21A-7003110-GP 1941-48 All Passenger Cars

FRONT DOOR
01A-7321410-GP 1940 Coupe, Fordor & Sedan Delivery

VENT WINDOW
01A-7021448/9-GP 1940 Closed Car

QUARTER WINDOW
78-704220-S-GP 1937-40 Coupe

REAR WINDOW

78-704220-GP 1937 Coupe & Sedan, 1938 Coupe & (^)
Standard Sedan, 1939-40 Coupe
81A-704220-GP 1938 Deluxe Sedan, 1939-40 Sedan
01C-8142084-GP 1940-47 Pickup
$5.00 each
1937-40 Car & 40 -47 Pickup
WINDOW/WINDSHIELD GLASS PATTERNS
Bob Drake’s rubber seals are designed with proper stretch for
the original size and shape glass. Patterns are full size, a must
for proper cutting of glass and to provide a water-tight seal.
GLASS SETTING TAPE
A must for properly sealing glass into windshield frame.
Special “all rubber” formula designed to look and perform like
original Ford factory type, creating a water tight bond as it
cushions the glass. Fold tape over glass edge and insert glass
into frame. Excess can be easily trimmed.
Beautifully crafted rear window frames for your soft-top Ford. 
Precision engineered for easy installation and a secure fit. The
outside frame is polished stainless with solid mounting channels
securely affixed to inner surface. These match up perfectly with
the chrome or painted tan inside frame with accurate mounting
holes. Upgrade yours today. Hardware included.
To determine thickness
needed, measure the width
of glass, then the width of the
channel that glass fits into.
Subtract the width of glass from
the width of channel and divide
this figure by two. This equals
tape thickness. For best results,
tape should be slightly larger
than the gap. Sold in 20’ x 11/2”
wide roll.
Rear Window Frames (Open Car)
Window Glass Patterns