CHASSIS & SUSPENSION
MUSTANG II I.F.S. COIL SPRINGS
Fine-tune your ride with a pair of these road-tested units
made just for our I.F.S. system. Made to higher specs than your
average auto parts store springs, pick the weight that suits
your lightweight town-hopper or heavy highway cruiser. It’s all
about enjoying the ride in comfort with safe handling.
Recommended for lighter weight cars & pickups 3000 lbs. and
under with flathead or small block V8:
FS-8275 275 pounds/inch
Recommended for medium weight cars & pickups over 3000
lbs. with flathead or small block V8:
FS-8300 300 pounds/inch
FS-8325 325 pounds/inch
Recommended for heavier cars over 3500 lbs. with small or big
block V8 and A/C, etc.:
FS-8350 350 pounds/inch
FS-8375 375 pounds/inch
$78.00 pairTUBULAR UPPER CONTROL ARMS FOR I.F.S.
Although the stock upper arms work fine, they just don’t have
the nice tubular design and appealing look that these arms
have. Their performance is also outstanding. Easy to have
chrome-plated. Includes arms, ball joints, shafts, and bushings.
CA-001 $305.00 kitI.F.S UPPER & LOWER CONTROL ARM PIVOT BOLT KIT
Use with our CA-001 Upper Control Arms or AU-0230 Lower
A-arms or stock Mustang II upper & lower A-arms. Kit does both
lowers or both uppers. Includes 4 T-bolts and 2 main pivot bolts.
1 kit does both sides.
AU-2082C $32.00 kitSTRUT-ROD KIT FOR I.F.S.
A must for proper support and tracking when using stock
Mustang II or our AU-0230 Lower A-arms. Features rubber
pivot bushings for free action, connects to frame bracket
and bolts to lower control arm. Mounting and support
brackets with mounting hardware are included. Not needed
when using full lower A-arms. Must use with Bolt-on I.F.S. &
stock-type or tubular lower A-arms.
AU-2085 $140.00 kitSTOCK MUSTANG II STYLE
TUBULAR LOWER A-ARMS FOR I.F.S.
Perfect replacements for factory O.E.M. units using
strut rods. Each pair comes with ball joints, bushings
and shock mount bolts. Also uses our AU-2085 Strut Rod
Kit & AU-2082C Bolt Set.
AU-0230 $355.00 pairTUBULAR STRUT-ROD KIT
Universal kit. Mustang installation. You
only need to notch the strut-mount
plates to meet your frame rail. Kit
comes complete with bushings
and mounting hardware.
Not to be used with Bolt-On
I.F.S. or full lower A-Arms
Use with Stock Type or
Tubular Lower A-Arms
AU-2095 $150.00 kit