Bob Drake Catalog

800-221-FORD (3673)

TOOLS

Rubber Seal

Glass

Body/Window Frame

MULTI-TOOL

This cool tool should be in everyone’s box. The neat little ball

shaped end lifts the flap of the seal up and over the body flange

without tearing like a screw driver would do. Do the job in a

lot less time with the proper tool. Also good for burnishing or

applying pressure to hard to reach places.

TL-1002 $15.00 each

An Inexpensive Tool

With Many Uses

ROPE-IN TOOL, 1/4" GREEN CORD

Use the rope in tool when working with rubber gasket to

set glass. The unique counter-grip plastic handle injects

the rope through its stem as it is pulled around the gasket.

There is plenty of durable rope to fit around even the

largest truck windows. This device is a must when installing

a rubber gasket.

PRP-0001 $12.00 each

DOOR PANEL CLIP REMOVER

Quick easy way to remove door panel clips without causing

damage to the trim pad. Insert the tool under the trim pad or

upholstery and rock the clip out.

PRP-0017 $12.00 each

HEADLINER

INSTALLATION TOOL

The headliner tool is specifically designed for the

installation of headliners. The shape allows you to push

vinyl headliners with the unique shape and design.

PRP-0066 $8.00 each

WINDOW & DOOR CLIP REMOVER TOOL

Window and door clip remover and installer. For

removing the C-type clip that hold the cranks and

window handles in place.

PRP-0749 $9.00 each

MOLDING RELEASE TOOL

Beveled for easy entry under molding. Made from

tempered high-carbon steel, this handy tool is used to

remove trim moldings from around bonded windshields

and rear windows. Tool works in either direction, so

there is no need to turn it end for end or change tools.

Removes moldings in a fraction of the time required with

any other tool. Lays flat on glass; will not twist in lifting

clips as narrower tools do.

PRP-0063 $9.00 each

WINDSHIELD WIPER ARM REMOVER

Makes wiper arm removal and replacement an easy job

without damaging the vehicle finish. Simply place the "hook"

under the arm base, lift and squeeze the wiper arm and tool

handle together. The wiper arm lifts right off. Reverse the

procedure to install a wiper arm. Overall length: 67/8".

AU-20907 $10.00 each

Find us on

Facebook

http://www.facebook.com/BobDrakeReproductions