CYLINDERS
202 BAILEYHYDRAULICS.COM | 1-800-800-1810 | [email protected]
MOBILE PRODUCTS
GEARBOXES
40 HP Right Angle Bevel Gearbox With Three Keyed Shafts
Right angle gearbox with three 1” keyed shaft. Cast iron housing is sealed to protect the gears and taper roller bearings. The
body is drilled and tapped 4-1/4” square with 3/8” holes. Ships without oil (1/3 qt of 80-90 W). Gearbox is drilled and tapped with
the same bolt pattern on both sides of the gearbox. This allows you to mount and arrange the shafts the way you need them.
Input shaft turning clockwise will make one output shaft turn clockwise and the other turn counterclockwise (CW/CW/CCW).
Part No. Bolt Patern Shafts Shafts In/Out Direction RPM Ratio MSRP 15% OFF120250 4-1/4” Square with 3/8”
Tapped Holes3 1” X 2-1/4” with 1/4”
KeywayCW to
CW/CCW1,800 1:1 $225.00 $191.2540 HP Right Angle Bevel Gearbox with Crosshole & Keyed Shaft
Right angle gearbox with a 1” crosshole shaft and a 1” keyed shaft. Cast iron housing is sealed to protect the gears and
taper roller bearings. The body is drilled and tapped 4-1/4” square with 3/8” holes. Ships without oil (1/3 qt of 80-90 W).
Gearbox is drilled and tapped with the same bolt pattern on both sides of the gearbox. This allows you to mount and
arrange the shafts the way you need them. SHAFTS TURN IN THE SAME DIRECTION (CW/CW).Part No. Bolt Patern Shafts Input Shafts Output Shaft Direction RPM Ratio MSRP 15% OFF120253 4-1/4” Square with 3/8”
Tapped Holes2 1” X 2-1/4” with
5/16” Crosshole1” X 2-1/4” with
1/4” KeywayCW/CW 1,800 1:1 $215.00 $182.7540 HP Right Angle Bevel Gearbox with Two Keyed Shafts
Right angle gearbox with 1” keyed shafts. Cast iron housing is sealed to protect the gears and taper roller bearings. The
body is drilled and tapped 4-1/4” square with 3/8” holes. Ships without oil (1/3 qt of 80-90 W) Gearbox is drilled and tapped
with the same bolt pattern on both sides of the gearbox. This allows you to mount and arrange the shafts the way you need
them. SHAFTS TURN IN THE SAME DIRECTIONS (CW/CW).
Part No. Bolt Patern Shafts Shafts In/Out Direction RPM Ratio MSRP 15% OFF120252 4-1/4” Square with 3/8”
Tapped Holes2 1” X 2-1/4” with 1/4”
KeywayCW/CW 1,800 1:1 $220.00 $187.0040 HP Right Angle Bevel Gearbox with Two Keyed Shafts
Right angle gearbox with 1” keyed shafts. Cast iron housing is sealed to protect the gears and taper roller bearings. The
body is drilled and tapped 4-1/4” square with 3/8” holes. Ships without oil (1/3 qt of 80-90 W). Gearbox is drilled and tapped
with the same bolt pattern on both sides of the gearbox. This allows you to mount and arrange the shafts the way you need
them. SHAFTS TURN IN OPPOSITE DIRECTIONS (CW/CCW).
Part No. Bolt Patern Shafts Shafts In/Out Direction RPM Ratio MSRP 15% OFF120251 4-1/4” Square with 3/8”
Tapped Holes2 1” X 2-1/4” with 1/4”
KeywayCW/CCW 1,800 1:1 $210.00 $178.50