Padding tip
Here’s a tip to save you time attaching the padded cushion or
backrest to the wood frame: Many seat cushion springs have metal
tabs on the edge for securing to the wood frame. It can be very
difficult to get to these tabs while holding the padded seat cushion, a
hammer and a nail. LeBaron Bonney uses strips of excess topping
material to attach the spring to the wood in the following manner
(any sturdy material may be substituted for this usage): Center the
spring on the wood frame. Next, starting alongside one of the metal
tabs, slide your attachment material under and around the base of the
spring. Complete the wrap around the spring edge and staple it to the
wood frame (H). Repeat this process around the spring, using three to
four attachments on the front and rear edges, and one attachment on
each side. Trim excess material so it does not interfere with your final
seat covering.