Steels_ Metallurgy and Applications, Third Edition

Low-carbon strip steels 129

9. Picketing, F.B. In Materials Science and Technology VoL 7: Constitution
   and Properties of Steel, VCH, p. 41 (1992).


10. Turkdogan, E.T. Iron and Steelmaker, 16, 61 (1989).


11. Copreaux, J., Gaye, H., Henry, J. and Lanteri, S. ECSC Report 7210.
    EC/303 (1994).


12. Hudd, R.C., Jones, A. and Kale. JISI, 209, 121 (1971).


13. Liu, W.J. and Jonas, J.J. Met. Trans., 20A, 1361 (1989).


14. Kozasu, I. In Materials Science and Technology Vol. 7: Constitution and
    Properties of Steel, VCH, p. 183 (1992).


15. Kozasu, I., Ouchi, C., Sampei, T. and Okita, T. In Microalloying 75, Union
    Carbide Corp., p. 120 (1977).


16. Ouchi, C. In High Strength Low Alloy Steel, Proc. of Wollongong Int. Conf.,
    August 1984, p. 17 (1985).


17. Steven and Haynes. In An Atlas of Continuous Cooling Diagrams for Engi-
    neering Steels, British Steel Corporation.


18. Krauss, G. In Materials Science and Technology Vol. 7: Constitution and
    Properties of Steel, VCH, p. 1 (1992).


19. Andrews, K.W.J. Iron and Steel Inst., 203, 721 (1965).


20. Hutchinson, W.B. Int. Mat. Rev., 29, 25 (1984).


21. Roe, K.J.J. Appl. Phys., 36, 2024 (1965).


22. Bunge, H.J.Z. Metallkd., 56, 872 (1965).


23. Hu, H. Textures of Crystalline Solids, 4, 13 (1980).


24. Emren, F., Schlippenbach, U. and Lucke, K. Mat. Sci. and Tech., 5, 238
    (1989).


25. Randle, V. Microtexture Determination and its Applications, The Institute
    of Materials, London (1992).


26. Held, J.F. In Mech. Working and Steel Processing IV: Proc. 8th Conf., Edge-
    combe, D.A. (ed.), Warrendale: AIME, pp. 3-38 (1965).


27. Schlippenbach, U. and Lucke, K. In Proc. 7th Riso Int. Syrup. on Met. and
    Mat. Sci., Roskilde, Riso Nat. Lab., pp. 541-546 (1986).


28. Leslie, W.C., Michalak, J.T. and Aul, F.W. In Iron and its Dilute Solid
    Solutions, Interscience Publishers, New York, p. 119 (1961).


29. Abe, M. In Materials Science and Technology Vol. 7: Constitution and Prop-
    erties of Steel, VCH, p. 285 (1992).


30. Dillamore, I., Smith, C.J.E. and Watson, T.W. Met. Sci. J., 1, 49 (1967).


31. Every, R.L. and Hatherly, M. Texture, 1, 183 (1976).


32. Takechi, H., Kata, H. and Nagashima, S., Trans. AIME, 242, 56 (1968).


33. Decker, B.F. and Harker, D. Z Appl. Phys, 22, 900 (1951).


34. Ray, R.K., Jonas, J.J. and Hook, R.E. Int. Mat. Rev., 39, 129 (1994).


35. Emren, F., Schlippenbach, U. and Lucke, K. Acta Metall., 34, 2105 (1986).


36. Ono, S. and Nishimoto, A. Trans. Iron and Steels Inst. Japan, 26, B33
    (1986).


37. Ushioda, K., Hutchinson, W.B., Agren, J. and Schlippenbaeh, U., Mat. Sci.
    and Tech., 2, 807 (1986).


38. Lankford, W.T., Snyder, S.D. and Bauscher, J.A. Trans. ASM, 42, 1197
    (1950).