Low-carbon strip steels 133
114.
115.
116.
117.
118.
Ohashi, N., Irie, T., Satoh, S., Hashimoto, O. and Takahashi, I. SAE Paper
810027, (1981).
Takechi, H. In Proc. Syrup. Hot and Cold Rolled Sheet Steel Cincinnati,
Pradhan, R. and Ludkovsky, G. (eds), The Metallurgical Society, p. 117
(1988).
Shimada, M., Nashiwa, M., Osaki, T., Furukawa, Y., Shimatani, Y.,
Fujita, Y. and Aihara, H. Review of Annealing Technology, Technical
Exchange Session, IISI, p. 17 (1996).
Hanai, N., Takemoto, N., Takunaga, Y., Mizuyama, Y. Trans. Iron Steel
Institute Japan, 24, 17 (1984).
Mizui, N., Okamoto, A., Amagasaki and Tanioku, T., Proc. Int. Conf. Steel
in Motor Vehicle Manufacture, Wttrzburg, 24-26 September, p. 85 (1990).
Yamazaki, K., Horita, T., Umehara, Y., Morishita, T. In Proc. Micro
Alloying '88, Materials Park, Ohio, ASM, p. 327 (1988).
Rana, F., Skolly, R. and Gupta, I. In Proc. Symp. High-Strength Sheet Steels
for the Motor Industry, Baltimore, Pradhan, R. (ed.), The Iron and Steel
Society, p. 89 (1994).
Hayashida, T., Oda, M., Yamada, T., Matsukawa, Y. and Tanaka, J. In
Proc. Syrup. High-Strength Sheet Steels for the Motor Industry, Baltimore,
Pradhan, R. (ed.), The Iron and Steel Society, p. 135 (1994).
Sakata, K., Satoh, S., Kato, T. and Hashimoto, O. Int. Forum for Physical
Metallurgy of IF Steels, Tokyo, Iron and Steel Institute of Japan, p. 279,
May (1994).
Zackay, V.F., Parker, E.R., Fahr, D. and Busk, R. Trans. Am. Soc. Met., 60,
252 (1967).
Williams, E.W. and Davies, L.K. In Recent Developments in Annealing, ISI
Special Report 79 (1963).
Irie, T., Satoh, S., Hashiguchi, K., Takahashi, I. and Hashimoto, O. Trans.
Iron and Steel Inst. Japan, 21, 793 (1981).
Lawson, P.D., Matlock, D.K. and Krauss, G. In Proc. Conf. on Fundamen-
tals of Dual Phase Steel, Kot, R.A. and Bramfitt, B.L. (eds), Warrendale,
AIME, p. 347 (1981).
Gladman, T. In Advances in the Physical Metallurgy and Applications of
Steel, Eyre, B.L. (ed.), The Metals Society, London, p. 55 (1981).
Maid, O., Dahl, W., Strassburger, C. and Muschenborn, W. Stahl u. Eisen,
108, p. 355 and 365 (1988).
Speich, G.R. and Miller, R.L. In Proc. Conf. on Fundamentals of Dual
Phase Steel, Kot, R.A. and Bramfitt, B.L. (eds), Warrendale, AIME, p. 279
(1981).
Messien, P., Herman, J.C. and Greday, T. In Proc. Syrup. on Metallurgy of
Continuous Annealed Sheet Steel, Brarnfitt, B.L. and Mangonon, P.L. (eds),
Dallas, AIME, p. 271 (1982).
Speich, G.R., Demarest, V.A. and Miller, R.L. Metall. Trans., 12A, 1419
(1981).
Bleck, W., Drewes, E.J., Engl, B., Litzke, H. and Muschenbom, W.
Stahl u. Eisen, 106, 21 (1986).
