134 Steels: Metallurgy and Applications
131.
132.
133.
134.
135.
136.
150.
151.
152.
153.
154.
Hehemann, R.F. Phase Transformations, Aaronson, H.I. (ed.), Metals Park,
OH, Amer. Soc. Met., p. 397 (1970).
Shirasawa, H. and Thomson, J.G. Trans. Iron Steel Inst. Japan, 27, 360
(1987).
Sakuma, O., Matsumura, O. and Akisue, O. ISIJ International, p. 1348,
November (1991 ).
Okamoto, A., Nagao, N., Takahashi, M. and Saiki, K. In Proc. Syrup.
on Metallurgy of Continuous Annealed Sheet Steel, Bramfitt, B.L. and
Mangonon, P.L. (eds), Dallas, AIME, p. 287 (1982).
Sudo, M. and Kokubo, I. Scand. J. Met., 13, 329 (1984).
Minote, T., Torizuka, S., Ogawa, A. and Niikura, M. ISIJ International, 36,
201 (1996).
Sakuma, Y., Matlock, D.K. and Krauss, G. Developments in the Annealing
of Sheet Steels, Pradhan, R. (ed.), The Minerals, Metals and Materials
Society, p. 321 (1992).
Sugimoto, K., Usui, N., Kobayashi, M. and Hashimoto, S. ISIJ Interna-
tional, 32, p. 1311, No. 12 (1992).
Matsumura, O., Sakuma, Y. and Takechi, H. ISIJ International, 32, 1014
(1992).
Jones, A. and Evans, P.J. Int. Syrup. Low Carbon Steel for the 90's, Asfa-
hani, R. and Tither, G. (eds), Pittsburgh, TMS, (1993).
Itami, A., Takahashi, M. and Ushioda, K. ISIJ International, 35, 1121
(1995).
Tanaka, Y., Shirasawa, H. and Miyahara, M. SAE Paper 850117 (1985).
Rigsbee, J.M. and VanderArend, P.J. In Formable HSLA and Dual-Phase
Steel, Davenport, A.T. (ed.), Warrendale, AIME, p. 56 (1979).
Hosoya, Y., Tsuyama, S., Nagataki, S., Kanetoh, S., Izuishi, T. and
Takada, Y. NKK Technical Review, No. 72, p. 20 (1995).
Matsumura, O., Sakuma, Y. and Takechi, H. Trans. Iron Steel Inst. Japan,
27, 570 (1987).
Evans, P.J. Report, Project 7210.MB/815, Commission of the European
Communities (1995).
Denner, S.G. Proc. Int. Conf. on Zinc and Zinc Alloy Coated Sheet Steel
(GALVATECH '89), ISIJ, Tokyo, p. 101 (1989).
British Steel, Colourcoat and Stelvetite Brochure, British Steel.
British Steel, Colourcoat and Stelvetite Pre-finished Steels Technical
Manual, British Steel.
Morgan, E. Tinplate and Modern Canmaking Technology, Pergamon Press
(1985).
Singh, S., Kotting, G. and Schmidt, G. DVS 165, SMD 1156, 26 (1996).
Jones, T.B. and Williams, N.T. Resistance Spot Welding of High Strength
Steels, C287/81, I. Mech. E. (1981).
Jones, T.B. and Williams, N.T. Resistance Spot Welding of Rephosphorised
Steel A Review of Welding in the World, 23, No. 11/12, 248.
Williams, N.T. In Proc. Vehicle Design and Components- Materials Inno-
vation and Automotive Technology, 5th IAVD Conf., Dorgham, M.A. (ed.),
Geneva, Interscience (1990).
