demo-41545716885

50 | September 2018 http://www.cakedecorationmagazine.co.uk``````21 Flatten the underside of the nosewith the flat side of the Dresden tool.``````22 Use a pointed tool or small ball tooland insert into nose to make nostrils,flaring them out to the sides.``````23 Cut a slit into the paste forthe mouth.``````24 Add a dimple to each side of themouth with the smaller end of theboning tool.``````25 Use small embossing tool to 'draw'under the lower lip, almost makinganother mouth shape, smooth this'trough' out with Dresden tool orfingers– leaving the lower lip.``````26 Shape the creases from the mouthto the jaw with the Dresden tool.``````27 Use a wooden shaper tool to pullout the top lip.``````28 Use a small ball tool to draw in theupper lip in an 'm' shape and add adimple between the top lip and nose.``````29 With the Dresden tool add creasesfrom the side of the nose to the mouthto enhance the top lip.``````30 Dot the sides of the mouth with apointed tool.``````19 Shape the jaw line so that it is fairlysquare. Use the boning tool to createeye sockets. Continue the eye socketgently down the sides of the face withthe boning tool to make temples.``````20 Roll small amount of paste intoa teardrop and smooth into face forthe nose.p47-51_Rhu Strand.indd 50 09/08/2018 17:56