Paragon_Hard_Disk_Manager_17

(Vakriz) #1

network resource, or measure transit delays of packets across an Internet Protocol (IP) network to track down
problematic nodes.


To avoid this action every time you start up the recovery media, we recommend you to pre-
configure network settings and map network resources during its creation. For more details,
please consult Building Recovery Media.


  1. Start up the computer from the WinPE recovery media.

  2. Click Settings & Tools on the sidebar, then select Network Configurator.

  3. Use the Network properties tab to change the computer identification on the network.

    • Device name and Workgroup. Click Change if you’d like to join a specific workgroup or edit an
      automatically generated computer name.

    • Adapter properties. By default, the recovery environment is configured to get an IP address from a
      local DHCP server. If there’s no DHCP server on the network, please set up IP settings manually,
      providing a static IP address, network mask, default gateway, etc.



  4. Use the Network drives tab to manage network shares.

Free download pdf