- Click the pin on the hand to select it. You can tell that a pin is selected because it has a white
dot in the center. Drag the selected pin up to move the hand and not the rest of the artwork.
The pin you set, farther down the arm near the “elbow,” was a point to pivot around. The other
default pins on the body help to keep the body in place without moving it. Having at least three
pins on your artwork usually achieves a better result.Note
If you don’t see a pin on the hand, you can click to add one. If there is a pin between
the hand pin you just added and the elbow pin you added previously, click to select it,
then press Delete or Backspace to remove it.Tip
You can press the Shift key and click multiple pins to select them all or click the Select
All Pins button in the Properties panel to select all of the pins.
With the hand pin still selected, move the pointer over the dotted circle, and drag
counterclockwise a little to rotate around the pin.
Click the pin that was added to the leg, by default. Press Backspace or Delete to remove it.