9. Choose Auto-Between from the menu. This generates the outer corner of any path that the
Pattern brush will be applied to from the light bulb artwork.
Click OK. The Lights brush appears in the Brushes panel.
Choose Select > Deselect.
Applying a Pattern brush
In this section, you’ll apply the Border Pattern brush to a path on the cabin. As you’ve seen,
when you use drawing tools to apply brushes to artwork, you first draw the path with the drawing
tool and then select the brush in the Brushes panel to apply the brush to the path.1. Choose 1 from the Active Artboard menu in the Properties panel to navigate to the first
artboard with the main scene artwork on it.
2. With the Selection tool ( ) selected, click the straight green path on the cabin.
3. Choose View > Zoom In a few times to zoom in.
4. In the Tools panel, click the Fill box, and make sure that None ( ) is selected, and then click
the Stroke box and select None ( ).
5. With the path selected, click the Lights brush in the Brushes panel to apply it.
6. Choose Select > Deselect.