Central Controls
Central Control
- Battery-programmable faceplate allows for programming prior to
installation. - When controller is integrated into a central control system, feature
set changes to that listed on page 162.
Note: Requires a CCU to connect to Maxicom^2. - Available in 2 enclosures:
- Powder-coated wall mount steel cabinet
- Stainless steel pedestal
Operating Specifications
- Station timing: A, B, C, D: 0 to 2 hours in 1-minute increments;
2 to 12 hours in 10-minute increments - Automatic starts: 32 starts total, eight per program per day
- Programming schedule: 1. ODD day watering per program;
2. EVEN day watering per program 3. CYCLICAL (1 to 99 days,
variable per program; 4. Custom day-of-the-week by program - Test program: Variable 1 to 99 minutes
Electrical Specifications
- Input required: 117 VAC ± 10%, 60Hz
(International models: 230 VAC± 10%, 50Hz) - Output 26.5 VAC, 2.5A
- Station load capacity: Up to two 24 VAC, 7VA solenoid valves per
station plus a master valve or pump start relay - Diagnostic circuit breaker skips and indicates stations with
overloaded circuits - Non-volatile, 100-year memory holds program, date, and time during
power outages. - Battery backup: 9VDC, NiCad rechargeable for programming under
battery power and for maintaining active program-in-progress
during a power outage - Heavy-duty electrical surge protection
- Single-point ground bus bar
Dimensions
- Wall Mount Metal
Width: 11^5 ⁄ 16 " (28,7 cm)
Height. 11^1 ⁄ 2 " (29,2 cm)
Depth: 6^1 ⁄ 2 " (16,5 cm) - SS Pedestal
Width: 11^1 ⁄ 2 " (29,2 cm)
Height. 30" (76,2 cm)
Depth: 11^1 ⁄ 2 " (29,2 cm)
Models
Two-wire Communication CCU or TWI to Satellite
- ESP-12SAT-2W: 12 stations, wall mount
- ESP-16SAT-2W: 16 stations, wall mount
- ESP-24SAT-2W: 24 stations, wall mount
- ESP-28SAT-2W: 28 stations, wall mount
- ESP-32SAT-2W: 32 stations, wall mount
- ESP-36SAT-2W: 36 stations, wall mount
- ESP-40SAT-2W: 40 stations, wall mount
- ESP-12SAT-2S: 12 stations, stainless steel pedestal
- ESP-16SAT-2S: 16 stations, stainless steel pedestal
- ESP-24SAT-2S: 24 stations, stainless steel pedestal
- ESP-28SAT-2S: 28 stations, stainless steel pedestal
- ESP-32SAT-2S: 32 stations, stainless steel pedestal
- ESP-36SAT-2S: 36 stations, stainless steel pedestal
- ESP-40SAT-2S: 40 stations, stainless steel pedestal
Link Radio Communication CCU or TWI to Satellite
- ESP-12SAT-LW: 12 stations, wall mount
- ESP-16SAT-LW: 16 stations, wall mount
- ESP-24SAT-LW: 24 stations, wall mount
- ESP-28SAT-LW: 28 stations, wall mount
- ESP-32SAT-LW: 32 stations, wall mount
- ESP-36SAT-LW: 36 stations, wall mount
- ESP-40SAT-LW: 40 stations, wall mount
- ESP-12SAT-LS: 12 stations, stainless steel pedestal
- ESP-16SAT-LS: 16 stations, stainless steel pedestal
- ESP-24SAT-LS: 24 stations, stainless steel pedestal
- ESP-28SAT-LS: 28 stations, stainless steel pedestal
- ESP-32SAT-LS: 32 stations, stainless steel pedestal
- ESP-36SAT-LS: 36 stations, stainless steel pedestal
- ESP-40SAT-LS: 40 stations, stainless steel pedestal
Note: All models also available in 50Hz
Note: If LINK communication is to be used between the CCU and the
satellites, a Radio/Modem kit must also be specified.
Note: ESP-SAT field satellite controllers require a CCU to connect to the
Maxicom^2 system.
Note: Two-wire path is a hardwire communication path connecting the
ESP-SAT to the CCU.
Note: Link Radio is wireless radio communication connecting the
ESP-SAT to a CCU.
Note: 12, 16 & 24 station models occupy 1 channel on CCU. 28, 32, 36 & 40
station models occupy 2 channels on CCU.
Note: Link Radio communication satellites have 2 sensor inputs.