Rotors
Rotors
Falcon® 6504
Uncompromising Performance
■ Performance – Rain Curtain™nozzles
■ Easy to Use – Ratcheting slip clutch mechanism
■ Flexibility – High-speed model completes full rotation in
approximately one minute for quick wet-down of clay tennis
courts and sports turf infield areas.
Features
- Rain Curtain™nozzles with multiple ports for optimal long-range,
mid-range, and close-in watering resulting in superior uniformity. - Five-year trade warranty.
- Stainless steel riser option helps deter vandalism on public turf areas.
- Easy arc adjustment (part-circle model) through top of rotor from
40° to 360°. - Water-lubricated gear drive for reliable, durable rotation.
- Heavy-duty, stainless steel retract spring ensures positive pop-down.
- Standard black rubber cover or optional purple rubber cover for non-
potable water. - Removable Seal-A-Matic™(SAM) check device prevents puddling and
erosion caused by low-head drainage. - Nozzles are interchangeable from the front with no special tools.
- Self-adjusting stator does not require replacement when changing
nozzles. - Ratcheting slip clutch mechanism speeds installation.
- Radius adjustment screw allows radius reduction up to 25% without
changing nozzles. - Small 2" (5,1 cm) exposed diameter reduces possibility of injury in
play areas. - Patented, pressure-activated wiper seal and tapered riser stem
on both plastic and stainless steel models protect internals from
debris to ensure positive pop-up and retraction. - 4" (10,2 cm) pop-up height to center line of nozzle clears taller
turfgrass. - Stainless steel trip gears ensure long-term durability.
- Optional non-potable rubber cover (purple).
- Falcon rotors can be ordered from the factory with nozzles
pre-installed in case quantities as a special order.
Falcon
6504
Falcon
6504
Stainless
Steel
F4- PC- SS- HS- 16- P
Model
F4: Falcon
Rotation
Part-circle
Optional
Feature
Stainless
steel riser
Optional
Feature
Pre-installed
Nozzle
Optional
Features
Non-
potable
cover
or,
High-
speed
rotor
How To Specify
Note: For non-U.S. applications, it is necessary to
specify NPT or BSP thread type.
NP
or
Nozzle Size
16