Products Catalogue First Edition 2021

Chapter 3: Machinery

Product Catalogue Kuwait -1

st Edition

COMFIT/COMFIT MAXI

Chocolate Coating Machine

The coating pan made entirely of AISI 304 steel, equipped with
an electronic speed control to optimize the sugar-coating of
different type and size products.
The introduction of air into the rolling tank cavity is controlled
by a cooling unit which speeds up the increase in size of the
candies with the introduction of chocolate. During the following
phase, using a resistance, it is possible to smooth and polish
the product and clean the machine. There is a thermo regulator
on the control panel which enables the regulation of the
temperature to suit the process required.

Technical Data

COMFIT

Tank Capacity: 20 kg
Hourly production: 20 kg
Dimensions (HxWxD): 1500 x 720 x 1200 mm Interchangeable
air filter

COMFIT MAXI

Tank Capacity: 50/60 kg
Hourly production: 40 kg
Dimensions (HxWxD): 1650 x 1100 x 1500 mm
Interchangeable air filter

MICRON GRINDER

Ball Refiner

The Micron ball refiner was designed for the production

of spreadable creams, anhydrous pastes for ice creams,

pralinated products and cream sweets. The machine is

equipped with a refrigerator with the purpose of regulating,

within the set limits, the excess heat caused by the friction

generated between the spheres. The circulation of the product

during refinement is maintained by a dual purpose volumetric

pump. The refining cylinder is also regulated to maintain a

warm temperature to prevent the fatty residues between the

balls from solidifying during pauses in the working cycle.

Technical Data

Tank capacity: 20/25 kg

Hourly production rate: 10 kg/h

Dimensions (HxWxD): 1300 x 750 x 850 mm

Refining capacity: below 20 microns

Mill

This machine has the specific task of grinding the cocoa nibs

in particles of size between 200 and 250 microns. The product,

once inserted into the hopper, is crushed by stainless steel pins

to obtain a “pre-refined” paste.

Versatility and ease of use allow this machine to be used

also for the refining of dried fruit, constituting an excellent

alternative to the vertical cutter.

Technical Data

Production rate: 50-60 kg

Dimensions (HxWxD): 1400 x 550 x 800 mm