4 / DISMANTLE CASE
Strip down the case to its individual parts, or just the exterior panels if
you’re only spraying those. Take photos of the case at each step, so you
know which pieces go where.
7 / SAND AND FILL
Deep scratches and dents are unlikely to be solved by filling them with
primer, so it’s best to fill and sand them first. Use 3M glazing putty, along
with a spatula or old flexible plastic card to smooth the putty into the
scratches, then use 800-grit sandpaper to finish.5 / CLEAN SECTIONS
Cases will have fingerprints, stickers and other grime on them that can
affect the paint finish, so you need to clean it first. Use warm water with a
dash of washing-up detergent and a sponge, rinsing thoroughly after and
allowing it to dry naturally.
8 / USE PROTECTIVE GLOVES
Protect your skin by wearing long clothes and protective gloves. These
are essential not only to prevent skin reactions, but also to prevent you
from transferring oils to the paint surfaces from your fingers.6 / REMOVE PORTS, BUTTONS AND FILTERS
It’s essential to remove any case buttons, ports and dust filters, as these
parts can become clogged with paint and no longer function. They’re
usually screwed in place and easy to remove.
9 / USE GOGGLES
Goggles are essential, as the paint will get everywhere, including your
eyes. Make sure the goggles seal around your eyes with no gaps.