- Insert eight 1 kohm resistors (R15–R18, R32–R35) from the emitter
pins of each transistor to the ground bus, as shown in Figure 5-11. - Insert one 2.2 kohm resistor (R1), one 2 kohm resistor (R2), two 47
kohm resistors (R3 and R4), one 100 kohm resistor (R5), two 5 kohm
resistors (R6 and R8), one 1 kohm resistor (R9), one 5 kohm resistor
(R6), and one 220 kohm resistor (R10) on the breadboard, as shown in
Figure 5-12.
Pin 7 of IC2 to base of Q5
Pin 1 of IC2 to base of Q1
Base of Q1 to base of Q2
Base of Q2 to base of Q3
Base of Q3 to base of Q4
Base of Q5 to base of Q6
Base of Q6 to base of Q7
Base of Q7 to base of Q8
Figure 5-9:
Connect
IC2 to
transistors.
Chapter 5: Making Light Dance to the Music 99