untitled

10. Insert one 2 kohm resistor (R19), two 47 kohm resistors (R20 and
    R21), one 100 kohm resistor (R22), one 5 kohm resistors (R21), two 1
    kohm resistors (R25 and R26), and one 220 kohm resistor (R27) on the
    breadboard, as shown in Figure 5-13.


11. Insert wires to connect the collector pins of the transistors to the ter-
    minal blocks, as shown in Figure 5-14.

C6 from IC2 Pin 5 to ground bus

C4 from microphone TB to open region

C5 from IC1 Pin 7 to R24 TB

C3 from R7 TB to IC2 Pin 3

C2 from IC1 Pin 1 to R7 TB

C1 from microphone TB to open region

Figure 5-10:

Insert

capacitors

into the

breadboard.

100 Part II: Sounding Off!