Putting everything together..............................................................
After you have a completed breadboard, all the switches in the box, and the
microphone and dish assembled, it’s time to put all those elements together.
Follow these steps to finish building your parabolic microphone:
- Attach Velcro to the breadboard and the box and secure the bread-
board in the box. - Attach Velcro to the battery pack and the box and secure the battery
pack in the box.
Red wire
to headphone
jack
Wires to
potentiometer
lugs Red wire to phono jack
Black wire
to on/off switch
Black wire from battery
pack to on/off switch
Black wire
to headphone jack
Black wire to phono jack
Figure 6-17:
Solder wires
to the on/
off switch,
phono plugs,
potentiome-
ter, and
headphone
plug.
134 Part II: Sounding Off!