See Chapter 4 for more information about choosing drill bit sizes for par-
ticular components and other pieces of wisdom on how to customize a
box for your projects. Make sure you use safety glasses when drilling
and clamp the box to your worktable!
- Slip the shaft of the on/off switch through the drilled hole and secure
with the nut provided. - Slip the shaft of the potentiometer through the drilled hole and secure
with the nut provided.
C8 from IC2 Pin 5 to speaker TB
C7 from Pin 7 of IC2 to ground
C9 from Pin 5 of IC2 to open region
R2 from C9 to ground
C1 from IC1 Pin 8 to ground
C3 from IC1 Pin 7 to ground
C6 from Pin 1 of IC2 to Pin 8 of IC 2
C4 from Pin 2 of IC1 to Pin 3 of IC 1
C5 from Pin 2 of IC1 to ground
Figure 8-9:
Insert
resistors
and
capacitors
on the
breadboard.
176 Part II: Sounding Off!