- Solder the black wire from each of the battery packs to one lug of the
on/off switch and solder an 8" black wire to the remaining lug of the
on/off switch, as shown in Figure 8-11. - Solder one 8" wire to a variable capacitor lug and solder one 8" wire
to the metal body of the variable capacitor, as shown Figure 8-11.
The lugs are electrically connected to the stationary plates of the capaci-
tor, and the metal body is electrically connected to the rotating plates.
- Solder 8" wires to each of the three potentiometer lugs, as shown
Figure 8-12. - Solder 8" wires to each of the two speaker lugs, as shown Figure 8-12.
Black wire to on/off switch Wire to capacitor body
Black wire from IC1 battery pack to on/off switch
Black wire from IC2 battery pack to on/off switch
Wire to capacitor lug
Figure 8-11:
Wires
soldered to
the on/off
switch and
variable
capacitor.
.
178 Part II: Sounding Off!