If the hole for the LED socket is small enough that the socket fits tightly,
this “press fit” will hold it in place; if the socket is a little loose, use a
little glue to secure it to the pumpkin. Read about what kind of glue to
use in Chapter 3.- Make sure that the on/off switch is in the off position and then attach
the battery snap connector to a filled battery pack. - Place the battery pack in the pumpkin.
Figure 9-13:
An LED
socket and
a socket
with LED
inserted.Figure 9-12:
Solder wires
to the on/off
switch
and the
potenti-
ometer.202 Part III: Let There Be Light