untitled

18. Chose a location on the plywood sheet where you will place the
    breadboard.


19. Attach Velcro to the breadboard and the plywood and then attach the
    breadboard to the plywood, as shown in Figure 10-23.


20. Insert the wires from the battery pack and the dolphins to the termi-
    nal blocks on the breadboard, as shown in Figure 10-23.
    If the wire on the battery pack isn’t long enough to reach the bread-
    board, splice and solder longer 20 gauge red and black wires. Protect the
    splices with electrical tape or heat shrink tubing.

Red wire from dolphin 1

Black wire from dolphin 1

Red wire from dolphin 3

Black wire from dolphin 3

Red wire from dolphin 5

Black wire from dolphin 5

Black wire from battery pack

Red wire from dolphin 2 Red wire from dolphin 4

Black wire from dolphin 4

Black wire from dolphin 2

Red wire from battery pack

Figure 10-23:

The

breadboard

in place.

236 Part III: Let There Be Light