- Attach the castor, using^5 ⁄ 8 " 6-32 screws and nuts, also shown in
Figure 11-38. - Feed the wires through the^1 ⁄ 4 " hole and secure the wires with the wire
clips (as shown in Figure 11-38); then slip the wheels on the motor
shafts and secure the wheels with the screw provided. - Stick Velcro to the base of the kart and attach the battery packs,
switches, and breadboard to the top of the base, as shown in Figure
11-39. - Attach wires from the motors to the terminal blocks, as shown in
Figure 11-40.
Figure 11-39:
Attach
various
parts to
the kart.
Chapter 11: Controlling a Go-Kart, Infrared Style 273