untitled

You can use either a plug that requires soldering to the wire or one that

uses a screw to secure the wire, as we have here.

12. Press the clamp onto the 1" PVC pipe and attach the box to the clamp
    with the 8-32 screws and nuts.
    Figure 12-17 shows the box attached to the handle.


13. Plug the right-angle phono plugs into the phono jacks, as shown in
    Figure 12-17.

The finished metal detector is shown in Figure 12-18.

Figure 12-17:

Box

attached to

the handle

and phono

plugs in

place.

298 Part IV: Good Vibrations