- Attach the speaker, switches, and microphone to the box, as shown in
Figure 14-10.
We used^5 ⁄ 8 " 6-32 screws and nuts to attach the speaker to the box. By
creating a very tight hole for the microphone, we could press-fit it into
the hole. (Press-fittingmeans that you don’t need glue or another method
to keep something in place.) The record switch was also press-fitted into
a hole although we did use just a drop of glue to secure it. The on/off
switch was attached with the supplied nut.Figure 14-9:
Drill holes
for the
switches,
microphone,
and
speaker.
Chapter 14: Couch Pet-ato 353